D-Link DVG-6004S User Manual page 26

Hide thumbs Also See for DVG-6004S:

Table of Contents

DVG-6004S User's Manual

General Settings → SIP

Proxy Server IP/Domain: Enter the IP address or URL (Uniform Resource Locator) of SIP proxy server or

soft switch.

Proxy Server Port: Enter the SIP proxy server's listening port for the SIP in this field. Leave this field to the

default if your VoIP Service Provider did not give you a server port number for SIP.

Proxy Server Realm: Enter the realm for SIP proxy server. It is used for authentication in a SIP server. In

most cases, the VoIP Gateway can automatically detect your SIP server realm. So you can leave this

option blank. However, if your SIP server requires you to use a specific realm you can manually enter it in.

TTL (Registration interval) [10-7200 s]: The interval for VoIP Gateway re-report to SoftSwitch.

SIP Domain: Enter the SIP domain provided by your VoIP Service Provider. (Note some SIP proxy servers

might not require this.) If you enable "Uses Domain to Register", the VoIP Gateway will register to the SIP

VoIP Gateway Configuration

Table of Contents