Caller Filter; Acl For Management - D-Link DVG-2016S User Manual

Method 1- Single mapping: Fill a short code into the "Speed Dial Code" column, and enter the
desired phone number into the "Number To Dial" column.
For example, pick up the handset and dial 55＃ and the system will dial 32568791.
Method 2- Multi mapping; Fill the prefix code into the " Speed Dial Code" column and the format to
transfer into the "Number To Dial" column.
For example, pick up the handset and dial 301＃, and the system will dial 521301.
If the user dial 00 1657987456321, the system will DIAL 856
1657987456321

Caller Filter

This function is used at allow or deny SIP Invite from the Proxy list ONLY.
Filter IP Address: Fill up with the start IP you would like to allow/deny.
Subnet mask: Fill up with the subnet mask you would like to allow/deny.

ACL for Management

You can use ACL to allow the user that is from some IP address to enter Web.
Enable ACL for Management: Enable ACL for Management if ticked.
Filter IP Address: Fill up with the start IP you would like to allow.
Subnet mask: Fill up with the subnet mask you would like to allow.
Web: Enable management from Web if ticked.