Table of Contents
Advertisement
OPTIMATE 2 DUO: CONNECTION ACCESSORIES
Two interchangeable connection sets are supplied with the battery charger:
1) A battery lead with metal eyelet lugs for permanent fitment to the battery posts, and re-sealable
weatherproof cap on the on the connector that connects to the charger output cable. Consult a
professional service agent for assistance in attaching the metal eyelets to the battery posts. Secure
the connector with weatherproof cap so that it cannot foul any moving part of the vehicle or the cable
optimate1.com
can be pinched or damaged by sharp edges.
/om2d
IMPORTANT: This battery lead is protected by a 15A fuse. If under any circumstance the fuse blows,
do not try and replace the fuse without first identifying and correcting the issue that caused the fuse
to blow. Only replace the fuse with a 15A rated ATO fuse.
Duo
2) A set of battery clips for charging the battery on or off-vehicle. Read IMPORTANT SAFETY
INSTRUCTIONS points 8 or 9 before connecting to the battery.
AUTOMATIC BATTERY CHARGER
FOR
OPTIONAL BATTERY CONNECTION: On some vehicles it is possible to charge the battery through the
12V LEAD-ACID
&
fitted auxiliary 12V DIN/ISO 4165 power socket. The battery can only be charged and maintained if the
12V socket remains powered up after the ignition has been turned off and the vehicle has been
parked. Find a suitable accessory at www.optimate1.com.
USING THE OPTIMATE 2 DUO: PROCEEDING TO CHARGE
14.4V
8.8V
For safety reasons, the OptiMate output will only activate if a battery retaining at least 4V is
1
2
3
connected.
4V
LED PANEL:
1
2
NOTE: Charge stations / banks on OptiMate2 DUOx2 / OptiMate2 DUOx4 operate independently.
Amps / Ampères
LED #1 - Power on. Confirms AC power supply to the charger.
LED #2 : ERROR - requires user interaction.
REVERSE POLARITY PROTECTION - Lights when the battery connections are incorrect. The
charger is electronically protected so no damage will result, and the output will remain disabled
until the connections are corrected.
FAULTY BATTERY - Blinks / flashes if battery could not hold a basic charge, possible due to
12V 2A
12.8V LIFEPO
4
13.6V
4
24-7
24-7
4
3
24-7
24-7
Model: TM550
INPUT: 100-240V
0.54A@100Vac / 0.31A@240Vac
OUTPUT : 12V
Duo
AUTOMATIC BATTERY CHARGER
FOR
12V LEAD-ACID
12.8V LIFEPO
4
optimate1.com
/om2d
14.4V
8.8V
1
2
3
4V
1
2
12V / 12.8V
50-60Hz
2A
12V 2A
13.6V
4
24-7
24-7
3
4
24-7
24-7
7
Advertisement
Table of Contents
