• Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Action
Appliance is not working properly or at all
- Check the power supply / temperature setting /
ambient temperature.
- Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
- Check the temperature setting / ambient temper-
ature.
- The appliance door is not closed properly, check
the door seal.
Loud noise during operation
- Check that the appliance is level.
"Operating noise"
- See
Water on the appliance bottom
- Check the temperature setting / water discharge
channel or opening.
Light does not work
- Check the power supply.
"Changing the light"
- See
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
.
.
Technical Data
Climate class N: this appliance is intended to be
used at ambient temperature ranging from 16°C to
32°C.
Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Rated power: ..............................................85 W
Rated current: ...............................................0.5 A
Dimension H x W x D / Weight...............................
Appliance size: .......................51.0 x 43.0 x 47.5 cm
Net weight: ..................................approx. 16.5 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the of-
ficial website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
23