BOMANN KSG 7282.1 Instruction Manual page 20

highest level,
4, 5*
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
For initial operation, first set the lowest possible inter-
nal temperature (= highest power level) until the ap-
pliance has reached the desired operating tempera-
ture. It is recommended to reset to a medium power
level afterwards, then you can easily make any tem-
perature correction.
Recommendation, for optimized storage a medium
power level is generally best. A high power level also
increases energy consumption.
Interior light
The indoor light is switched on or off via the on/off
switch at the appliance back.
Equipment
Note that the equipment varies depending on the ap-
pliance type.
The various shelves or drawers can be height-ad-
justed (partially and model-dependent) or removed
for individual storage. Practical also for cleaning pur-
poses.
NOTE:
For the most efficient use of energy, place all
shelves/drawers in their original positions.
Removing / inserting the shelves
• To remove, open the unit door completely, lift the
shelf, if necessary, slant slightly and pull it out to
the front.
• Safely reinsert the shelf at the desired height and
push it in until the stop is reached.
Storing
The appliance is exclusively suitable for cooling and
storing drinks.
Several storage levels for inserting the grid shelf, al-
lows individual storage.
Capacity / loading:
44 cans à 330 ml (70 x 120 mm)
32 bottles à 500 ml (70 x 170 mm)
Store large bottles horizontally, with the opening fac-
ing forward on the grid shelf.
Operating noise
Type of sound
Mumbling
Liquid sounds
Click sounds
Disturbing
noises
20
Cause
Compressor during its operation
Circulation of the refrigerant
The temperature control turns
the compressor on or off
Vibration of the shelves or cool-
ing coils