Lan; Ipv4 - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

LAN

To configure the router's local interface, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 79. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
Mode of local IP
address assignment
IP address
Subnet mask
Gateway IP address
Device domain name
Local IP Address
For the Access point, Repeater, and Client modes only.
Select the needed value from the drop-down list.
Static: the IP address, subnet mask, and the gateway IP address are
assigned manually.
Dynamic: the router automatically obtains these parameters from
the LAN DHCP server or from the router to which it connects.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
For the Access point, Repeater, and Client modes only.
The gateway IP address which is used by the router to connect to the
Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
The name of the device assigned to its IP address in the local subnet.
Page 91 of 191
Configuring via Web-based Interface
Description