Wps - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a
method for connection to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
The WPS function allows adding devices only to the basic wireless network of the router.
Before using the function you need to configure one of the following authentication types:
!
Open with no encryption, WPA-PSK , WPA2-PSK , or WPA-PSK/WPA2-PSK mixed
with the AES encryption method. When other security settings are specified, controls of
the WPS page are not available .
To activate the WPS function, on the tab of the relevant band, click the ENABLE WPS button.
Figure 93. The page for configuring the WPS function.
Page 108 of 191
Configuring via Web-based Interface