D-Link DWR-921 User Manual page 35

DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work mode list select the
WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network, configure LAN ports
to connect an STB or VoIP phone, and set your own password for access to the web-based interface
of the device.
Figure 25. Selecting an operation mode. The WISP Repeater mode.
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Wired
connection value. Then from the Work mode list select the Access point value. In this mode
you can change the LAN IP address, set your own settings for the wireless network and set your
own password for access to the web-based interface of the device.
Figure 26. Selecting an operation mode. The Access point mode.
Page 35 of 191