D-Link DWR-921 User Manual page 36

DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network, and set your own password for access to the web-based interface of the device.
Figure 27. Selecting an operation mode. The Repeater mode.
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the Client value. In this mode you can change the LAN IP address, connect
your device to another access point and set your own password for access to the web-based
interface of the device.
Figure 28. Selecting an operation mode. The Client mode.
When the operation mode is selected, click the NEXT button.
Page 36 of 191