Reset; Router Reset; Description Of Router Reset And Restart - Advantech SmartFlex SR304 User Manual

5.9.10 Reset

When the PWR LED starts flashing on the front panel, it is possible to restore the de-
fault configuration of the router by pressing the RST button on the rear panel. After pressing
this button the default configuration will be restored and the router will reboot (after which the
green LED will be on).
It is necessary to use a narrow screwdriver or any other small tool to press the RST button.
Before resetting the router, it is recommended to back up the router configuration settings
(see Configuration manual) because resetting the router will return all configuration set-
tings to their default states.
It is important to distinguish between the router reset and reboot.
Action Router behavior
Reboot Turns off and then turns on the router
Reset Restores the default configuration and
reboots the router
Table 18: Description of router reset and restart
SmartFlex SR304
Figure 39: Router reset
Invoking events
Disconnect
power,
press the Reboot button in the web
configuration
Press the RST button
30
and reconnect the