Status & Settings Screen - GE 600-1064-95R b Installation Manual

Item Description
Speaker Provides voice output and sounds key beeps. The
panel speaks arming level change, system status,
and voice chime sensor trips. The panel voice is also
used for voice reporting and remote phone control.
To access the emergency screen and select the
appropriate emergency icon (Panic, Police, or Fire),
press EMERGENCY in the top left corner of the
screen.
Time Displays the current system time.
Depicts the status of the AC power and battery. A
green power cord icon represents AC power to the
system. A red battery icon represents low battery
power to the system. A green battery icon
represents a charged battery.
This will appear on the home screen in the event of
an alarm. Messages will also display on this icon
describing what caused the alarm. Press this icon to
cancel the alarm.
These four icons depict the status of the sensors
installed in your system.
A green check indicates sensors are closed or no
recent activity detected. A red exclamation
indicates sensors are open or recent activity has
been detected.
Pressing these icons will open a new screen to
provide more detail.
If the icon shows N/A, your system is not configured
to support that type of sensor.
Press this icon to access the Arming Screen.
One of these icons will display depending on your
arming level. Press to turn off intrusion/burglary
protection for your system. Only intrusion/burglary
sensors are disarmed. Environmental sensors, such
as smoke and carbon monoxide detectors, stay
active at all times. Enter your code in the keypad
screen that appears. If you enter an incorrect code,
press the Clear icon and enter the correct code.
Press to access the Status & Settings screen.
Arming errors
If you select an arming option on the Arm screen, and there is an
arming problem, an arming error message will appear at the
bottom of the screen, indicating what the problem is and how to
correct it. For example, you might see a message that indicates
that you need to close the front door.
Correct the problem as indicated or press Bypass. You will see the
arming countdown message at the bottom of the screen. You can
touch Cancel and enter your code to stop the arming process.
Simon XTi Installation Guide
Status & Settings screen
Entering and exiting the Status & Settings screen
To enter the Status & Settings screen:
Press the Status & Settings icon
home screen.
To exit the Status & Settings screen:
Press Close to exit the Status & Settings screen and navigate up
one level.
Note: The system will automatically return to the main screen
after a period of inactivity.
A gold icon indicates an option is selected.
A blue icon indicates an option is not selected.
Status & Settings Screen navigation
1. Press the up/down arrows to scroll through the pages. (See
Table 3 below for Settings screen structure).
2. Press an icon to change the value of an option or enter a
subscreen.
3. Press Close to return to the previous screen.
Table 3: Status & Settings screen structure
Option How to view
Event History Press the Show icon to view system events.
Note: If a # appears in the Event History list, the
event was not sent to the central station.
Direct Bypass Press the Select icon to enter the sensor bypass
screen.
Panel Status Press the Listen icon to listen to the status of your
security system. Press Clear to clear the status.
Chime Press the On/Off icon to set the chime feature
On/Off.
Note: This option may or may not appear depending
on panel programming.
Special Chime Press the On/Off icon to set the special chime
feature On/Off.
Note: This option may or may not appear depending
on panel programming.
Lights Press Control to access the Light screen. From there
you can turn On/Off programmed lights.
Note: Has not been investigated by UL.
Door Locks Press Control to access the Door Lock screen. From
there you can lock/unlock programmed door locks.
Note: Has not been investigated by UL.
Voice Volume Press the arrows to adjust the speech volume level.
Beep Volume Press the arrows to adjust the beep volume level.
Brightness Press the arrows to adjust the screen's brightness.
on the lower right of the
5