Table of Contents
Advertisement
Option
How to view
Default Screen
Use this feature to set this panel's screen saver
mode. Select "Blank" to have the screen and LED go
dark after a period of inactivity. Otherwise, the
default will be the Home screen and the screen will
always be lit. If AC power is lost, the screen will go
blank after 2 minutes of inactivity to maximize
battery life.
Note: The screen will automatically go blank at 2:00
am daily for 60 minutes.
Calibration
Press the Show icon to enter the calibration screen.
This screen will allow you to recalibrate the touch
screen.
Help
Press the Help icon to access the Help menu.
Set Date/Time
Press Enter to set the date and time.
System Tests
Press Enter to perform a sensor test or system
download.
Programming
Press the Access Codes icon to change existing or
add new access codes.
Press the Security icon to turn downloader enable
on/off and to set the account number.
Press the Phone numbers icon to change existing or
add new phone numbers.
Press the Phone Options icon to access the
following phone options:
•
Manual phone test
•
Fail to communicate
•
DTMF dialing
•
300 BPS enabled
•
Ring hang ring
•
Dialer delay
•
Call waiting code
Press the Sensors icon to access the learn sensor,
edit sensor, and delete sensor options.
Press the Reporting icon to access the following
reporting options:
•
Opening report
•
Closing report
•
Force armed report
•
AC power failure report
•
Panel low battery report
•
Sensor alarm restoral report
•
24 hour sensor tamper
•
Supervisory tamper report
•
No usage report
•
Swinger shutdown
•
Programming report
•
Fire alarm verification
6
Option
How to view
Press the Timers icon to access the following timers
options:
•
Entry delay
•
Exit delay
•
No activity timeout
•
Audio phone test
•
Supervisory time
•
Alarm cancel window
•
RF timeout
•
Fail to open time
•
Fail to close time
•
Siren timeout
•
Unvacated premises
•
Smoke supervision
Press the Touchpad Options icon to access the
following options:
•
Keyfob no delay
•
Panic alarms
•
Remote TP arming
Press the System Options icon to access the
following system options:
•
RF jam detect
•
Demo mode
•
HW1 function
•
24 hour clock
Press the Siren Options icon to turn on/off the
following options:
•
Panel piezo beeps
•
Panel voice
•
Panel piezo alarm
•
Trouble beeps
•
Voice chime
•
HW siren supervision
•
Silent police panic
•
Alarm report verify
Press the Audio Verification icon to access the
following audio verification options:
•
Audio mode
•
Fire shutdown
•
Fire enabled AVM
•
Panic talk
•
VOX receiver gain
•
VOX microphone gain
•
VOX microphone gain range
•
Manual microphone gain
Press the System Tests icon to perform a sensor
test, communication test, or system download test.
Version
Displays the system's firmware version, touch
screen version, and copyright information.
Access Programming screen
1.
From the Status & Settings screen, press the down arrow to
scroll to the Programming option.
Simon XTi Installation Guide
Advertisement
Table of Contents
