Recording Automatically By Sensing Movements (Auto Rec) - JVC GY-HM70U Detailed User Manual

Hd memory card camera recorder
Hide thumbs Also See for GY-HM70U:
Table of Contents

Advertisement

Recording
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
Setting
OFF
Deactivates the function.
1SEC INTERVAL
Takes a frame at 1-second intervals.
Recorded videos will be played back at 30 times
speed.
2SEC INTERVAL
Takes a frame at 2-second intervals.
Recorded videos will be played back at 60 times
speed.
5SEC INTERVAL
Takes a frame at 5-second intervals.
Recorded videos will be played back at 150 times
speed.
10SEC INTERVAL
Takes a frame at 10-second intervals.
Recorded videos will be played back at 300 times
speed.
20SEC INTERVAL
Takes a frame at 20-second intervals.
Recorded videos will be played back at 600 times
speed.
40SEC INTERVAL
Takes a frame at 40-second intervals.
Recorded videos will be played back at 1 200 times
speed.
80SEC INTERVAL
Takes a frame at 80-second intervals.
Recorded videos will be played back at 2400 times
speed.
Caution :
Audio cannot be recorded during time-lapse recording.
0
Zooming, simultaneous still image recording, and image stabilizer are not
0
available in time-lapse recording.
When recording is stopped with the recorded time less than "0:00:00:17"
0
, the video will not be saved.
Seamless recording is disabled in time-lapse recording.
0
Memo :
Settings of time-lapse recording are reset when the power is turned off.
0
To start time-lapse recording again, it is necessary to make the selection
once more.
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse recordings with long
0
intervals.
It is also recommended to fix the focus and white balance manually.
"Tripod Mounting" (A p. 15)
"Adjusting Focus Manually" (A p. 27)
"Setting White Balance" (A p. 31)
If the video is recorded in progressive format (60p), the playback speed
0
is doubled.
(Example) A video recorded using "1SEC INTERVAL" is played back at
60 times normal speed.
40
Details
Recording Automatically by Sensing
Movements (AUTO REC)
This function enables the unit to record automatically by sensing the changes
in subject's movement (brightness) within the red frame displayed on the
LCD monitor. (AUTO REC)
It can be set for both video and still image modes.
1
Compose the picture according to the subject.
Adjust the angle of view with the zoom, etc.
0
2
Tap "MENU".
≪MEDIA
.
The top menu appears.
0
3
Tap "SPECIAL RECORDING".
TOP MENU
SILENT
.
4
Tap "AUTO REC".
SPECIAL RECORDING
.
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
5
Tap "ON".
AUTO REC
OFF
.
REC
MENU
INFO.
OFF
ON

Advertisement

Table of Contents
loading

Table of Contents