Table of Contents
Advertisement
Copying
Creating a Disc Using a Connected Blu-ray
Recorder
You can create discs using a Blu-ray recorder by connecting it to this unit
using a USB cable.
1
Remove the AC adapter and battery pack from this unit.
2
Connect to a Blu-ray recorder.
To DC Connector
2
AC Adapter To
AC Outlet
Blu-ray Recorder
.
A Connect using the provided USB cable.
B Connect the AC adapter to this unit.
3
Set the "STANDBY/ON OFF" switch to "ON".
.
When this unit is turned on, the "SELECT DEVICE" screen appears.
0
4
Tap "CONNECT TO OTHER".
SELECT DEVICE
SELECT DEVICE
TYPE TO CONNECT
.
84
To USB Connector
USB Cable (Provided)
CONNECT TO OTHER
5
Tap the desired media.
.
The following screen is displayed after the camera operation is
0
completed.
CONNECT TO OTHER
SD CARD
.
Operations are to be performed on the Blu-ray recorder after the
0
screen switches.
1
6
Perform dubbing on the Blu-ray recorder.
Refer also to the instruction manual of the Blu-ray recorder.
0
After dubbing is complete, disconnect the USB cable. Operations
0
cannot be performed on this unit until the USB cable is disconnected.
Memo :
To copy videos that are recorded in the 60p mode (when "SYSTEM
0
SELECT" is set to "60p"), use an AVCHD Progressive compatible Blu-ray
recorder.
Videos that are recorded in the 60p mode (when "SYSTEM SELECT" is
0
set to "60p") can only be copied to Blu-ray discs.
CONNECT TO OTHER
SELECT MEDIA TO OPEN
SLOT A
SLOT B
Advertisement
Table of Contents
