Table of Contents
Advertisement
Copying to Mac Computer
Copy the files to a Mac computer using the following method.
1
Remove the AC adapter and battery pack from this unit.
2
Connect the USB cable and the AC adapter.
To DC Connector
2
AC Adapter To
AC Outlet
.
A Connect using the provided USB cable.
B Connect the AC adapter to this unit.
3
Set the "STANDBY/ON OFF" switch to "ON".
.
When this unit is turned on, the "SELECT DEVICE" screen appears.
0
To USB Connector
USB Cable (Provided)
Computer
4
Tap "CONNECT TO PC".
CONNECT TO PC
.
The following screen is displayed after the camera operation is
0
completed.
PLAYBACK ON PC
.
1
The "JVCCAM_SD" icon appears on the desktop.
0
5
Start iMovie.
The subsequent operations are to be performed on the Mac
0
computer.
Caution :
When the camera and PC are connected by an USB cable, recorded
0
media are read-only.
MTS files that are copied to a Mac computer cannot be imported to iMovie.
0
To use MTS files with iMovie, import the files using iMovie.
Videos recorded in the 60p mode (when "SYSTEM SELECT" is set to
0
"60p") are not supported.
Memo :
To edit/view the files, use a software that supports AVCHD (video)/JPEG
0
(still image) files.
When removing this unit from the computer, drag & drop the
0
"JVCCAM_SD" icon on the desktop to the trash bin.
iMovie and iPhoto
You can import files from this unit to a computer using Apple's iMovie '08,
'09, '11 (video) or iPhoto (still image).
To verify the system requirements, select "About This Mac" from the Apple
menu. You can determine the operating system version, processor and
amount of memory.
For the latest information on iMovie or iPhoto, refer to the Apple website.
0
For details on how to use iMovie or iPhoto, refer to the help file of the
0
respective software.
There is no guarantee that the operations will work with all computer
0
environments.
SELECT DEVICE
SELECT DEVICE
TYPE TO CONNECT
Copying
95
Advertisement
Table of Contents
