Recording Automatically By Sensing Movements (Auto Rec) - JVC JY-HM90 User Manual

Recording Automatically by Sensing
Movements (AUTO REC)
This function enables the unit to record automatically by sensing the changes
in subject's movement (brightness) within the red frame displayed on the
LCD monitor. (AUTO REC)
It can be set for both video and still image modes.
1
Compose the picture according to the subject.
Adjust the angle of view with the zoom, etc.
0
2
Tap "MENU".
≪MEDIA
.
The top menu appears.
0
3
Tap "SPECIAL RECORDING".
TOP MENU
SILENT
.
4
Tap "AUTO REC".
SPECIAL RECORDING
.
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
5
Tap "ON".
AUTO REC
OFF
.
During still image recording, "CONTINUOUS SHOOTING" can also
0
be selected. However, selection is disabled when "IMAGE SIZE" is
set to "5664 x 4248" or "2816 x 2112".
REC MENU
INFO.
OFF
ON
6
Recording starts automatically when the subject within the red frame
moves.
.
A red frame appears 2 seconds after the menu display disappears.
0
For video recording, recording continues while there are still
0
movements of the subject (changes in brightness) within the red
frame. When there are no more movements of the subject (changes
in brightness) within the red frame, recording will stop in 5 seconds.
To stop video recording manually, press the REC button. However,
0
as the "AUTO REC" setting remains at "ON" even after the video
recording is stopped, recording starts again when movements of the
subject (changes in brightness) are detected within the red frame. To
cancel "AUTO REC", set it to "OFF".
Caution :
Digital zoom, image stabilizer, self-timer, and continuous shooting are not
0
available after "AUTO REC" is set.
"AUTO REC" cannot be used together with "TIME-LAPSE RECORDING".
0
When both are set, priority is given to "TIME-LAPSE RECORDING".
"IMAGE SIZE" cannot be changed after "AUTO REC" is selected.
0
Set it before selecting "AUTO REC".
The auto power off and power-saving modes are not available after "AUTO
0
REC" is set.
Memo :
Recording stops when there are no changes for 5 seconds during video
0
recording.
Settings of "AUTO REC" are not saved when the power is turned off.
0
Recording may not start when the movements of the subject within the red
0
frame are too fast or the changes in brightness are too small.
Recording may start due to changes in brightness even if there is no
0
movement within the red frame.
While zooming, recording cannot be started.
0
Recording
0:00:00[0:00]
43