Table of Contents
Advertisement
Recording
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
Setting
OFF
Deactivates the function.
1SEC INTERVAL
Takes a frame at 1-second intervals.
Recorded videos will be played back at 25 times
speed.
2SEC INTERVAL
Takes a frame at 2-second intervals.
Recorded videos will be played back at 50 times
speed.
5SEC INTERVAL
Takes a frame at 5-second intervals.
Recorded videos will be played back at 125 times
speed.
10SEC INTERVAL
Takes a frame at 10-second intervals.
Recorded videos will be played back at 250 times
speed.
20SEC INTERVAL
Takes a frame at 20-second intervals.
Recorded videos will be played back at 500 times
speed.
40SEC INTERVAL
Takes a frame at 40-second intervals.
Recorded videos will be played back at 1000 times
speed.
80SEC INTERVAL
Takes a frame at 80-second intervals.
Recorded videos will be played back at 2000 times
speed.
Caution :
Audio cannot be recorded during time-lapse recording.
0
Zooming, simultaneous still image recording, and image stabilizer are not
0
available in time-lapse recording.
When recording is stopped with the recorded time less than "0:00:00:14"
0
, the video will not be saved.
Memo :
Settings of time-lapse recording are reset when the power is turned off.
0
To start time-lapse recording again, it is necessary to make the selection
once more.
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse recordings with long
0
intervals.
It is also recommended to fix the focus and white balance manually.
"Tripod Mounting" (A p. 19)
"Adjusting Focus Manually" (A p. 31)
"Setting White Balance" (A p. 35)
56
Details
Recording Automatically by Sensing
Movements (AUTO REC)
This function enables the unit to record automatically by sensing the changes
in subject's movement (brightness) within the red frame displayed on the
LCD monitor.
It can be set for both video and still image modes.
1
Open the LCD monitor.
Set the recording mode to either A video or B still image.
0
To switch the mode between video and still image, tap A or B on the
0
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Compose the picture according to the subject.
Adjust the angle of view with the zoom, etc.
0
3
Tap "MENU".
The shortcut menu appears.
0
4
Tap "MENU" in the shortcut menu.
5
Tap "AUTO REC".
Tap 3 or 2 to move upward or downward for more selection.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
6
Tap "ON".
Advertisement
Table of Contents
