Video - Axis Q6075-SE User Manual

AXIS Q6075-SE PTZ Camera
The device interface
Shows what kinds of access to the device that are active, and what encryption protocols are in use. Recommendations to the
settings are based on the AXIS OS Hardening Guide.
Hardening guide: Click to go to AXIS OS Hardening guide where you can learn more about how to apply cybersecurity best
practices.
PTZ
Shows the PTZ status.
Test: Click to test the PTZ mechanics. During the test, there are no video streams available. When the test is done, the device
restores its home position.
Connected clients
View details: Click to show all clients that are connected to the device.
Ongoing recordings
Recordings: Shows each ongoing recording and its source. For more information, see Recordings on page 33
Shows the storage space where the recording is saved.

Video

Click to play the live video stream.
Click to freeze the live video stream.
Click to take a snapshot of the live video stream. The file is saved in the 'Downloads' folder on your computer. The image
file name is [snapshot_YYYY_MM_DD_HH_MM_SS.jpg]. The size of the snapshot depends on the compression that is applied
from the specific web-browser engine where the snapshot is received, therefore, the snapshot size may vary from the actual
compression setting that is configured in the device.
Click to show I/O output ports. Use the switch to open or close the circuit of a port, for example to test external
devices.
Click to manually turn on or turn off the IR illumination.
Click to manually turn on or turn off the white light.
Click to access onscreen controls:
• Predefined controls: Turn on to use the available onscreen controls.
• Custom controls: Click
Starts the washer. When the sequence starts, the camera moves to the configured position to receive the wash
spray. When the whole wash sequence is completed, the camera returns to its previous position. This icon is only visible when the
washer is connected and configured.
Add custom control to add an onscreen control.
20