View And Record Video - Axis Q6075-SE User Manual

AXIS Q6075-SE PTZ Camera
Configure your device
- Set the move speed, which controls how fast to move to the next preset.
6. Go to Preset positions.
6.1 Select the preset positions that you want in your guard tour.
6.2 Drag them to the View order area, and click Done.
7. To schedule the guard tour, go to System > Events.
Create a recorded guard tour
1. Go to PTZ > Guard tours.
2. Click
3. Select Recorded and click Create.
4. Enter a name for the guard tour and specify the pause length between each tour.
5. Click Start recording tour to start recording the pan/tilt/zoom movements.
6. When you're satisfied, click Stop recording tour.
7. Click Done.
8. To schedule the guard tour, go to System > Events.

View and record video

This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 52.
Reduce bandwidth and storage
Important
Reducing the bandwidth can result in loss of details in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > Zipstream and do one or more of the following:
- Select the Zipstream Strength that you want to use.
Note
The Zipstream settings are used for both H.264 and H.265.
- Turn on Dynamic FPS.
- Turn on Dynamic GOP and set a high Upper limit GOP length value.
Guard tour.
in the live view.
12