Axis Q6075-SE User Manual page 18

AXIS Q6075-SE PTZ Camera
Configure your device
1
Axis network video device
2 Axis portcast device
3
Switch
Once the devices are connected, an audio tab becomes visible in the settings for your Axis network video device. Go to the audio
tab and turn on Allow audio.
See your Axis portcast device's user manual for more information.
Connect to a network speaker
Network speaker pairing allows you to use a compatible Axis network speaker as if it is connected directly to the camera. Once
paired, the speaker acts as an audio out device where you can play audio clips and transmit sound through the camera.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the network speaker,
then add the camera to your VMS.
Pair camera with network speaker
1. Go to System > Edge-to-edge > Pairing.
2. Type the network speaker's IP address, username and password.
3. Select Speaker pairing.
4. Click Connect. A confirmation message appears.
18