Table of Contents
Advertisement
AXIS Q6075-SE PTZ Camera
The device interface
View order: Displays the preset positions included in the guard tour.
• Import all preset positions: Click to add all preset positions to the guard tour. The preset positions are imported in
the order they are created.
•
: Click to play the guard tour.
Recorded
A recorded tour is a replay of a recorded sequence of pan/tilt/zoom movements, including their variable speeds and lengths.
General settings
• Name: Enter a name for the guard tour.
• Pause between runs: Specify the pause time between guard tour runs. Allowed values are from 0 minute to
2 hours and 45 minutes.
Recorded tour
• Start recording tour: Click to start recording the pan/tilt/zoom movements.
• Stop recording tour: Click to stop recording the pan/tilt/zoom movements.
• Re-record: Click to start a new recording of the pan/tilt/zoom movements. The new recorded tour will overwrite the
existing one.
•
Click to play the recorded tour.
•
Click to pause the recorded tour.
•
Click to stop playing the recorded tour.
Limits
To narrow down the area under surveillance, you can limit the PTZ movements.
Save as Pan 0: Click to set the current position as zero-point for pan coordinates.
Set pan-tilt limits: Turn on to set pan-tilt limits for PTZ movements. The camera uses the coordinates of the center of the
image when you set pan-tilt limits.
•
Left pan limit: Click to limit the camera's pan movements to the left. Click again to remove the limit.
•
Right pan limit: Click to limit the camera's pan movements to the right. Click again to remove the limit.
•
Top tilt limit: Click to limit the camera's tilt movements to the top. Click again to remove the limit.
•
Bottom tilt limit: Click to limit the camera's tilt movements to the bottom. Click again to remove the limit.
• Auto-flip
• E-flip
• Nadir-flip
Zoom limit: Select a value to limit the camera's maximum zoom level. Optical or digital (e.g. 480x D) values can be selected.
When using a joystick, only digital zoom levels can be used to set the zoom limit.
Near focus limit: Select a value to prevent the camera from autofocusing on objects close to the camera. This way, the camera
can ignore objects such as overhead wires, streetlights, or other nearby objects. To make the camera focus on the areas of interest,
set the near focus limit to a value greater than the distance at which the objects of no interest tend to appear.
: Enables the camera head to instantly reverse 360° and continue to pan beyond its mechanical limit.
: Automatically corrects the camera view by flipping the image 180° when the camera tilts beyond -90°.
: Enables the camera to pan 180° when tilting beyond -90°, and then continue upwards.
31
Advertisement
Table of Contents
