Up/Down Speed; Current Jump; Standard Tig Torch (5-Pole) - EWM Tetrix 451 AC/DC AW FW Operating Instructions Manual

Design and function
Remote control

5.12.9.3 Up/down speed

Functionality
Press and hold the up push-button:
Increase current up to the maximum value (main current) set in the power source.
Press and hold the down push-button:
Decrease current to the minimum value.
Use the machine configuration menu > see 5.17 chapter to set the up/down speed parameter
determines the speed with which a current change becomes effective.

5.12.9.4 Current jump

By tapping the corresponding torch trigger the welding current can be determined in an adjustable jump
range. Each tap will cause the welding current to jump up or down by the defined value.
The "current jump" parameter

5.12.9.5 Standard TIG torch (5-pole)

Standard torch with one torch trigger
Figure
Functions
Welding current on/off
Secondary current (latched operation)
92
is set in the machine configuration menu > see 5.17 chapter.
Operating Explanation of symbols
elements
BRT1 = torch trigger 1 (welding current on/off; secondary
current via tapping function)
Mode Operating
elements
1
(ex works)
099-000115-EW501
which
20.11.2017