Yamaha Tracer 9 GT 2021 Manual page 38

Instrument and control functions
 If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
Seat heater indicator (if equipped)
The seat heater can be used when the
engine is running. There are 10 temper-
ature levels. When activated, the indi-
5
cator will display the temperature level
from 1 (lowest) to 10 (highest).
To activate the seat heater, use the
wheel switch to highlight the seat heat-
er display with the cursor.
Press the wheel switch inward to se-
lect the seat heater function.
Once selected, rotate the wheel switch
up and down to adjust the temperature
level.
Press the wheel switch inward to con-
firm the temperature level and exit the
seat heater function.
NOTICE
 Be sure to wear protective
clothing that covers your hip
and legs when using the seat
heater.
 Do not use the seat heater in
warm weather.
 If the seat becomes worn or
damaged, stop using the seat
heater and replace the seat.
The function of the wheel switch can
be locked into grip warmer/seat heater
mode by pressing and holding the
wheel switch inward while the grip
warmer indicator or the seat heater in-
dicator is highlighted by the cursor.
In this mode, the temperature levels
can be instantly adjusted by rotating
the wheel switch up/down.
While in this mode, press the wheel
switch inward to toggle between the
grip warmer and seat heater functions.
To exit this mode and return the wheel
switch to its normal functionality, press
and hold the wheel switch inward.
TIP
ECA25721
The current grip warmer/seat heater
settings are saved when the vehicle is
turned off.
5-13
Lap timer
This stopwatch function can be acti-
vated through the settings MENU. (See
page 5-15.)
Once activated, the two vehicle infor-
mation displays on the main display
screen are replaced with:
1 0 0 : 1 2 . 3 4
02
LAP
0 0 : 3 0 . 2 3
LATEST
1. Lap count
2. Current lap time
3. Latest/Previous lap time
To start the timer, push the dim-
mer/pass switch down
"PASS".
Each push of the dimmer/pass switch
will increase the lap count by 1 and re-
set the current lap timer.
To pause the lap timer, press the wheel
switch inward.
2
3
towards