Settings Menu - Yamaha Tracer 9 GT 2021 Manual

Instrument and control functions

Settings MENU

MENU
Exit
Display Setting
Manual TCS Setting
Vehicle Setting
Shift Indicator
5
The settings MENU screen contains
the following settings modules. Select
a module to make related settings
changes.
Module
Exit MENU and return the
"Exit"
main display
Switch lap time mode
"Display Set-
on/off and adjust the ta-
ting"
chometer color
Adjust TCS/SCS/LIF set-
"Manual TCS
tings for the "TCS-MODE
Setting"
M"
"Vehicle Set-
Adjust BC/QS settings
ting"
Turn the shift indicator
"Shift Indica-
on/off and adjust tachom-
tor"
eter settings
View and reset mainte-
"Maintenance"
nance intervals
EAU92793
"Unit"
"Brightness"
"Clock"
"SUS. Sensor
Calibration"
"All Reset"
Settings MENU access and opera-
tion
MPH
How to use the settings MENU:
Rotate the wheel switch up or down to
highlight items or increase/decrease
values and briefly press the wheel
switch inward to confirm the selection.
Press and hold the wheel switch until
Description
the screen returns to the main display
to exit the MENU at any time.
TIP
 Certain settings menu screens
have an upward pointing triangle
mark item. Select the triangle
mark to save settings changes
and exit the current screen.
 Should vehicle motion be detect-
ed, the screen will automatically
exit the settings MENU and return
to the main display.
Set fuel consumption and
measurement units
Adjust screen brightness
Adjust the clock
Perform a sensor calibra-
tion
Return all settings to fac-
tory default
5-15
 To ensure that the desired settings
changes are saved, be sure to exit
each menu via the triangle mark (if
displayed). Exiting the settings
menu by pressing and holding the
wheel switch may not save set-
tings changes.
"Display Setting"
Display Setting
Lap Time OFF
Tacho Color OFF
This module allows you to switch the
lap time mode and tachometer color
mode ON/OFF.
When the lap time mode is ON, the
twin vehicle information displays on
the main display screen will show a lap
timer and a lap counter. To exit the lap
time mode, the turn lap timer OFF in
the Display Setting module.
MPH