To change the tachometer to color
mode, select ON.
"Manual TCS Setting"
Manual TCS Setting
TCS
1
SCS
1
LIF
1
This module allows you to customize
the "TCS-MODE M" which is accessi-
ble on the main display using the
MODE switches.
TCS
This model uses a variable traction
control system. For each setting level,
the further the vehicle is leaned over,
the greater the amount of traction con-
trol (system intervention) is applied.
There are 3 setting levels available for
the "TCS-MODE M".
Setting level 1 applies the least amount
of overall system intervention, while
setting level 3 applies the greatest
amount of overall traction control.
TIP
TCS can only be turned on or off
via the main display using the
MODE switches.
SCS and LIF can be turned off in-
dependently of TCS for "TCS-
MODE M".
When "TCS-MODE" has been set
MPH
to "OFF" on the main display:
TCS, SCS and LIF are all turned
off together.
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off,
setting level 1 provides the least
amount of system intervention, and
setting level 3 provides the greatest
amount of system intervention.
LIF
LIF can be set to OFF, 1, 2, and 3.
Instrument and control functions
Setting level 1 provides the least
amount of system intervention and set-
ting 3 most strongly reduces the rate of
wheel lift.
OFF turns LIF off.
"Vehicle Setting"
The vehicle setting module allows you
to adjust settings for the BC and QS
systems.
5-16
Vehicle Setting
BC Setting
QS Setting
MPH
5