Yamaha Tracer 9 GT 2021 Manual page 44

Instrument and control functions
"Clock"
Clock
1 0
5
This module allows you to set the
clock.
When the clock module is selected, the
hours will be highlighted.
Set the hours by rotating the wheel
switch. Push the switch to confirm and
highlight the minutes.
After confirming the minutes, you will
be returned to the top MENU screen.
"SUS. Sensor Calibration"
0 0
MPH
After any service to the rear suspen-
sion, a sensor calibration must be per-
formed using this module.
Select "Execute" and within approx. 10
seconds the result of the calibration
(success/failed) will be displayed.
TIP
When performing the sensor calibra-
tion, place the motorcycle on the cen-
terstand and there should be no weight
on the motorcycle.
SUS. Sensor Calibration
Result : . . . . .
Execute
MPH
5-19
"All Reset"
All Reset
NO
YES
This module resets all settings items
(except the odometers, Clock and
SUS. Sensor Calibration) to their de-
fault or factory presets.
Select YES to reset all items. After se-
lecting YES, all items will be reset and
the screen will automatically return to
the top MENU screen.
MPH