Ssh Server Allow-Legacy-Ssh-Rsa - Allied Telesis IE340 Series Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS
- -
SSH SERVER ALLOW LEGACY SSH

ssh server allow-legacy-ssh-rsa

Overview Use this command to enable support for the legacy ssh-rsa algorithm on the SSH
server. Support for this algorithm was removed in version 5.5.1-1.1 due to security
concerns. Support for it is still disabled by default and you should only enable it if
you cannot avoid using ssh-rsa. It cannot be enabled when the device is in Secure
Mode.
Use the no variant of this command to disable support for the legacy ssh-rsa
algorithm on the SSH server.
ssh server allow-legacy-ssh-rsa
Syntax
no ssh server allow-legacy-ssh-rsa
Default Disabled
Mode Global Configuration
Example To enable SSH server support for the legacy ssh-rsa algorithm, use the commands:
awplus#
awplus(config)#
Related show ssh server
commands
ssh server
ssh client allow-legacy-ssh-rsa
Command Version 5.5.3-0.1: command added
changes
C613-50631-01 Rev A
-
RSA
configure terminal
ssh server allow-legacy-ssh-rsa
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
3343