Table of Contents
Advertisement
Knowledge Base
See
Knowledge Base
for more detailed information.
How to Clone TV tuner settings through USB
NOTE: This procedure enables one console to be programmed to the customers liking (channel names, etc) and then copied into the
other consoles quickly.
1. Choose the console that will be used for doing all the programming of the tuner channels as desired. This console should be
scanned in the TV Setup and the channels named as desired. This console must also perform a Create Channel List in the TV Setup
to ensure that the GUI also is populated with the proper channel list.
2. Go into System Options > Configuration > Export / Import Settings.
3. Plug in a USB stick (preferably blank) into the USB port of the console.
4. Press Export Settings to USB stick. You will see the message below for a short time.
How To's
Page 25 of 116
Advertisement
Table of Contents
Need help?
Do you have a question about the 70T and is the answer not in the manual?