Table of Contents
Advertisement
Error 154
Error Message Displayed to user
•
HIIT zone has failed.
•
MIB detected an error with HIIT IO SPI com.
Condition
The E154 error indicates the console is unable to communicate to the HIIT Command Center.
Cause
•
Older software
•
A button on the HIIT CC was held for more than 10 seconds
•
A button was pressed repeatedly in a short amount of time
•
The I2C cable between HIIT CC and Display PCBA may be disconnected or damaged
•
The HIIT CC PCBA may be damaged
Remedy
•
Cycle power on unit and see if error goes away.
•
Reseat both ends of HIIT board cable, then cycle power on unit.
•
Replace HIIT board and/or HIIT cable, then cycle power on unit.
•
Ensure that latest software is installed. Download the latest software https://www.halo.fitness/web/softwareDownload.html.
Page 103 of 116
Advertisement
Table of Contents
Need help?
Do you have a question about the 70T and is the answer not in the manual?
Questions and answers