Dell P21T Owner's Manual page 34

Option
Advanced Boot Options
Date/Time
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
34
Description
Allows you to enable the Legacy Option
ROMs during the UEFI boot mode. This
option is enabled by default.
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
• Enabled UEFI Network Stack
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
NOTE: If you enable this option, the
UEFI Networking Protocols that are
available are installed, allowing the
pre-OS and the OS networking
features to use the enabled NICs.
Allows you to configure the internal
SATA hard-drive controller. The options
are:
• Disabled
• AHCI (Default Setting)
NOTE: SATA is configured to
support AHCI mode.
Allows you to configure the SATA drives
on board. The option is:
• SATA-0
• SATA-1
Default Setting: Both drives are enabled.
This field controls if the hard drive errors
for the integrated drives are reported
during system startup. This technology
is part of the SMART (Self Monitoring
Analysis and Reporting Technology)
specification.
• Enable SMART Reporting — This
option is disabled by default.
Allows you to define the USB
configuration. The options are:
• Enable Boot Support
• Enable External USB Port