Installing The Wlan Card; Removing The Display Assembly - Dell P21T Owner's Manual

Installing the WLAN Card

1. Insert the WLAN card to its connector on the system board.
2. Connect the WLAN cables to their connectors on the WLAN card.
3. Insert the metal bracket to secure the WLAN cables.
4. Tighten the screw to secure the WLAN card to the system board.
5. Install the:
a. battery
b. base cover
6. Follow the procedures in

Removing the Display Assembly

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
c. WLAN
3. To release the display assembly from the computer:
a. Disconnect the network cable from its connector on the system board [1].
b. Remove the screws that secure the metal bracket to the system board [2].
c. Remove the metal bracket to access the display cable [3].
d. Disconnect the display cable from its connector on the system board [4].
12
After Working Inside Your
Before Working Inside Your
Computer.
Computer.