Removing The Memory; Installing The Memory; Removing The Coin-Cell Battery - Dell P21T Owner's Manual

Removing the Memory

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
3. Pry the clips securing the memory module until the memory pops-up and remove the memory from
the system board.

Installing the Memory

1. Insert the memory on the memory socket until the clips secure the memory.
2. Install the:
a. battery
b. base cover
3. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
3. Perform the following steps:
a. Disconnect the coin-cell battery cable from its connector on the system board [1].
b. Peel the adhesive tape to release the coin-cell battery cable [2].
c. Release the coin-cell battery cable from its routing channels [3].
d. Pry the coin-cell battery to remove it from the computer [4].
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
23