Table of Contents
Advertisement
请勿在通电情况下接触板子，在操作板子前应使大容量电容器的电荷完全释放。接通电源
后，该评估板上通常会存在危险的高电压，板子上一些组件的温度可能超过50摄氏度。此
外，移除电源后，上述情况可能会短时持续，直至大容量电容器电量完全释放。
操作板子时应确保遵守正确的安全规程，否则可能会出现下列危险：
● 死亡
● 严重伤害
● 触电
● 电击
● 电灼伤
● 严重的热烧伤
请在操作本板子前完整阅读本文件。通电时禁止接触板子。所有测试与测量探针或附件必须
在板子通电前连接。通电时，禁止使板子处于无人看护状态，且禁止操作板子。必须确保在
操作板子前，大容量电容器已释放了所有电量。只有在切断板子电源，且大容量电容器完全
放电后，才可更换待测试器件。
PRD-06829 REV. 1, December 2022
© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the
SpeedVal Kit™ and Wolfspeed logo is a trademark of Wolfspeed, Inc. Other trademarks, product and company names
are the property of their respective owners and do not imply specific product and/or vendor endorsement,
sponsorship or association.
警告
SpeedVal Kit™ Half-Bridge User Guide
5
Advertisement
Table of Contents
Need help?
Do you have a question about the SPEEDVAL KIT HALF-BRIDGE MOD-MB-HB-0900V-40A and is the answer not in the manual?
Questions and answers