STIEBEL ELTRON CNS 75 Trend UK Manual, Operation And Installation
Wall mounted convector heater
Hide thumbs
Also See for CNS 75 Trend UK:
- Operation and installation instructions manual (96 pages) ,
- Operation and installation manual (80 pages) ,
- Operation and installation (76 pages)
Subscribe to Our Youtube Channel
Related Manuals for STIEBEL ELTRON CNS 75 Trend UK
Summary of Contents for STIEBEL ELTRON CNS 75 Trend UK
- Page 1 OPERATION AND INSTALLATION Wall mounted convector heater » CNS 50 Trend UK » CNS 75 Trend UK » CNS 100 Trend UK » CNS 150 Trend UK » CNS 200 Trend UK » CNS 250 Trend UK » CNS 300 Trend UK...
-
Page 2: Table Of Contents
CONTENTS | SpECial iNfOrmaTiON SpECial iNfOrmaTiON SPECIAL INFORMATION OPERATION General information �����������������������������������������3 Safety instructions ����������������������������������������������� 3 - Keep children under the age of 3 away from Other symbols in this documentation ����������������������� 3 the appliance if constant supervision cannot Information on the appliance ��������������������������������� 3 be guaranteed. -
Page 3: Operation
OpEraTiON General information Other symbols in this documentation - The power cable must only be replaced (for example if damaged) by a qualified contrac- Note tor authorised by the manufacturer, using an General information is identified by the adjacent symbol. original spare part. -
Page 4: General Safety Instructions
OpEraTiON appliance description General safety instructions WARNING Overheating In order to avoid overheating, do not cover the heater. WARNING Injury - Keep children under the age of 3 away from the Material losses appliance if constant supervision cannot be guar- - Ensure that the power cable is not touching the ap- anteed. -
Page 5: Programming Unit
OpEraTiON Operation Programming unit Symbol Description Window open detection: The programming unit is located at the top right of the appliance. To avoid unnecessary energy consumption while venting, the appliance automatically switches to frost protection mode for one hour when a window is open. The "window open detection" sym- bol flashes. -
Page 6: Settings
OpEraTiON Settings Settings As soon as the "Editable parameter" symbol appears, you can change the setting of the menu item with "+" and "–". Press "OK" to save the setting. Standard display To exit the standard menu, briefly press "Menu". The standard display appears. - Page 7 OpEraTiON Settings f Press the "OK" button. Note Comfort phase "3-01" has been configured. The following applies to all time programs (Pro1, Pro2, f To configure a further comfort phase, use "+" and "–" in time Pro3): program Pro3 to select display "3---". Proceed as describe If the end time is later than 23:59 h, the end time will above.
-
Page 8: Cleaning, Care And Maintenance
OpEraTiON | iNSTallaTiON Cleaning, care and maintenance Cleaning, care and maintenance problem Cause remedy Appliance is in "FP" When the appliance does Check external control unit program but does not not detect a signal at the and its settings. Wiring must The appliance contains no user serviceable parts. -
Page 9: Installation
iNSTallaTiON installation 10. Installation f Unhook the wall mounting bracket from the appliance. f Place the centred wall mounting bracket horizontally on the floor. Mark holes 1 and 2. 10.1 Minimum clearances f Lift up the wall mounting bracket so that its lower holes match up with the markings you have just made on the in- stallation wall. -
Page 10: Removing The Appliance
iNSTallaTiON Commissioning 10.4 Removing the appliance - Control cable connected to external control unit f Undo and remove the locking screw from the wall mounting The appliance can be connected to any control unit that issues the bracket. following waveforms as control signals. f To release the appliance, push down the springs at the top of instruction Oscilloscope... -
Page 11: Specification
iNSTallaTiON Specification 14. Specification 14.1 Dimensions and connections CNS 50 CNS 75 CNS 100 CNS 150 CNS 200 CNS 250 CNS 300 Trend UK Trend UK Trend UK Trend UK Trend UK Trend UK Trend UK Appliance Width 1050 Entry electrical cables Wall mounting bracket Horizontal hole spacing 14.2 Data table CNS 50... -
Page 12: Energy Consumption Data
iNSTallaTiON Specification 14.3 Energy consumption data The product data complies with EU regulations relating to the Directive on the ecodesign of energy related products (ErP). Product information on electric individual room heaters to regulation (EU) 2015/1188 CNS 50 CNS 75 CNS 100 CNS 150 CNS 200... -
Page 13: Guarantee
GUARANTEE | ENVIRONMENT AND RECYCLING Guarantee The guarantee conditions of our German companies do not apply to appliances acquired outside of Germany. In countries where our subsidiaries sell our products a guarantee can only be issued by those subsidiaries. Such guarantee is only grant- ed if the subsidiary has issued its own terms of guarantee. - Page 14 NOTES | CNS Trend UK www.stiebel-eltron.com...
- Page 15 NOTES www.stiebel-eltron.com CNS Trend UK |...
- Page 16 Deutschland Verkauf Tel. 05531 702-110 | Fax 05531 702-95108 | info-center@stiebel-eltron.de STIEBEL ELTRON GmbH & Co. KG Kundendienst Tel. 05531 702-111 | Fax 05531 702-95890 | kundendienst@stiebel-eltron.de Dr.-Stiebel-Straße 33 | 37603 Holzminden Ersatzteilverkauf Tel. 05531 702-120 | Fax 05531 702-95335 | ersatzteile@stiebel-eltron.de Tel.
Need help?
Do you have a question about the CNS 75 Trend UK and is the answer not in the manual?
Questions and answers