Deleting Times From A Week Program - State Water Heaters SUF 120-300 Installation, User And Service Manual

4.3.8
0311720_SUF_120-500_III_UKUK_V2.0 , 2017-08-01

Deleting times from a week program

All switch-on/off times are shown sequentially in the display. Assume that the switch-
on/off times for the water heater are programmed as in the figure.
To delete a period, proceed as follows:
1. [ ]: WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with [ENTER].
2.
Scroll with [ ] to PROGRAM OVERVIEW.
Confirm with [ENTER].
The display shows the menu for the week program.
3.
Scroll with [ ] to DELETE.
Confirm with [ENTER].
To warn you that you are now working in the delete sub-menu, the cursor is replaced
with an exclamation mark (!) and the period settings will blink.
4.
Scroll with [ ] to the day to be deleted. For example, SU (Sunday) in the second
period. See the figure.
Confirm with [ENTER].
35