Advertisement
Quick Links
CB6
Canvas Bi-Color 2800K-6500K Round Bendable LED Panel
What's Included
1 x CB6 Bi-color Round LED Panel Light
1 x 5/8" Baby Pin with 90 degree Mount Holes
1 x Controller box
1 x Egg Crate
1 x Hanging Strap
1 x Power Cord
1 x Power Supply
1 x Soft Box
1 x Soft ½ stop round cover
1 x X-Holder with Ball Mount
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Quick Start Guide
because we're filmmakers too
Advertisement
Related Manuals for Ikan CB6
Summary of Contents for Ikan CB6
- Page 1 Quick Start Guide Canvas Bi-Color 2800K-6500K Round Bendable LED Panel What’s Included 1 x CB6 Bi-color Round LED Panel Light 1 x 5/8” Baby Pin with 90 degree Mount Holes 1 x Controller box 1 x Egg Crate 1 x Hanging Strap...
-
Page 2: Getting Started
Overview The care and cleaning of the Canvas Round Bendable LED light. The CB6 should beplaced back into the carrying bag when not in use. The LEDs should be facing out when placed into the carrying bag. If the LED’s should get dirty or covered in dust the unit can be cleaned with mild soap and water on a damp cloth. - Page 3 Color & Brightness Color temperatures for today’s film and TV production are 5600K (daylight) and 3200K (tungsten). Ikan developed the CB6 Bendable Light to handle both these temperatures. With patented technologies, the CB6 offers a professional and customizable LED light source. In addition, the light features cooling flex system for optimizing heat dissipation.
-
Page 4: Appearance & Structure
Appearance & Structure CB6 is illustrated as follows 5/8 Receiver: attaches to a stand or a 5/8” baby pin w/ 90 degree holes Mount: Adjustable lighting direction Hook & Loop around the edge of the light Cover Installation 1/2-stop Round Cover Soft Box Installation Soft Box &... - Page 5 Method for Restoring the Soft Box Shape After Travel The soft box applicator will be out of shape from flat packaging or travel. Using the following steps, the round shape can be restored. Roll the soft box into a cylinder about 4-6 inches in diameter. Secure this cylinder for 24 hours before use. This will allow it to retain it’s round shape when applying. Appearance &...
-
Page 6: Installation & Power Supply
1. Ensure power is off before setting up light. 2. Place the light on the Ikan customized stands, release the tension knob on the 5/8” receiver, adjust the light in the desired direction, and then tighten the tension knob on the 5/8” receiver. -
Page 7: Optional Accessories
Optional Accessories Some other products that work well with the CB6 available from Ikan include: IBG-STND Stand Bag IBG-SB15 Saddle Sandbag & Weight Bag - 15 lb CP-STND-V3 Compact Light Stand HD-STND-V2 Heavy Duty Light Stand Learn More More dynamic information at official website: www.ikancorp.com Support Contact email: support@ikancorp.com...