Advertisement
Installation & Power Supply
1. Ensure power is off before setting up light.
2. Place the light on the Ikan customized stands, release the tension knob on the 5/8" receiver, adjust the light in the desired direction, and then tighten
the tension knob on the 5/8" receiver.
3. When connecting the power cords, plug the 4-pin XLR power cord into the controller box.
Notice & Maintenance
• The CB6 working temperature range must be regulated. Overheating will reduce the LED working life. Please allow adequate ventilation when using
the Canvas light.
• Products must be placed on a stable, dry, flat surface. Avoid exposure to sunlight and operating in an environment with high humidity or extreme
moisture levels.
• Don't beat, knock or shake the lighting equipment during the operation.
• If the CB6 isn't working normally, please contact the Ikan repair department. Please don't disassemble/re-assemble by yourself.
• Please place the CB6 in a cool and dry place when you don't use it for an extended period of time.
Troubleshooting
Failure
Unit Won't Turn On
During the operation lamp is out.
Specifications
Light Source
326 x 1.0watt LEDs
Head Type
Bi-Color 3200K-5600K
Beam Angle
120 Degree
Control/Dimming
Knob Control
Build Material
Flexable Fabric Material
Cooling System
Passive Cooling
Mounting System
Baby 5/8" receiver
Fixture Size
14 in. diameter
Fixture Weight
1lb
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Failure Cause
The power is connected incorrectly or
the power switch in not turned on.
The unit may have malfunctioned.
The unit's connecting cable may not be
properly secured.
Troubleshooting
Turn on the light with the switch on the
controller box. Make sure the unit is
plugged into AC power.
Try turning the control box off then on
again.
The cable can be disconnected and
then reconnected.
Electrical Specifications
Power Supply Input
Power Supply Output
Fixture Power Consumption
110-240VAC
15VDC
24W; 7.4-14.8VDC
because we're filmmakers too
Advertisement
