Table of Contents
Advertisement
SD9 Desk Assembly
Step 1: Attach Frame Ends to Legs
A.
Place one of the Legs (item 1) into the Frame End (part 3A and 3B) ensuring
that the bar (arrow) is on "top" in relation to the Leg (Item 1).
B.
Line up the holes on the Leg (item 1) with the holes on the Frame End
(part 3A and 3B)
C.
Using the supplied Allen Wrench, insert four (4) M6x10 Machine Screws
(item 9) through the holes in the Frame End (item 3A and 3B), going into
the Leg (item 1) and start to tighten with just a few turns. After all four (4)
M6 x10 Machine Screws (item 9) are inserted, tighten all four (4) screws.
D.
Do the same for the other Leg (item 1) and the Frame Ends
(item 3A and 3B).
NOTE:
If you drop a screw
inside the frame end,
simply tilt to retrieve.
12
M6x10
Allen
Wrench
Advertisement
Table of Contents
