SD9 Desk Operations
1
Console Buttons
1.
: Increases or decreases desk height.
2.
Display: Shows height range.
3.
Memory Keys: Pre-set buttons remember 4 different heights.
4.
M: Sets desk to desired height. Adjust desk height. Hold 'M' button down
and the display will flash for 5 seconds. Press any memory key and this will
store the position to this key.
Reset
A reset needs to be done when RST appears in the display.
Press the
and
digits with a buzz sound.
Standby Mode
After the motor stops working for 30 seconds the display will turn off. Press any
key, except the M key, to resume running.
Change Display
Press and hold the M key and 3 key simultaneously to switch the display unit
(cm & inch).
22
2
arrow keys at the same time until the display shows normal
3
4