Table of Contents
Advertisement
C.
Insert the other assembly completed in Step 3 to the Center Rails
(item 4) and line up the furthest holes on the ends using two(2) M6x15
Machine Screws (item 14).
D.
Slide the Center Rails (item 4) to the middle position of the desktop. Finger
tighten the eight(8) M6x10 Machine Screws (item 9). Check to be sure the
screws are tightening against the center rails. Tighten all machine screws.
Center Position
SD9 Desk Assembly
M6x15
Allen Wrench
M6x10
Allen Wrench
15
Advertisement
Table of Contents
