Remove The Right Ssd - Lenovo Legion Slim 5i Hardware Maintenance Manual

Step 1. Disconnect the battery pack cable from the system board. Remove one screw and then remove the
left SSD.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 8. Remove the left SSD
Screw specifications
M2.0 × L3.0
Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Go to https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to
restore the profile from Lenovo cloud.
Go to https://support.lenovo.com/partslookup
replacement part:
SSD

Remove the right SSD

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Remove one screw and then remove the
right SSD.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
32
Lenovo Legion Slim 5i (16", 8) and Lenovo Legion Slim 5 (16", 8) Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part numbers of the following
to download the installation