Battery Replacement - Tripp Lite SMART1050SLTAA Owner's Manual

Battery Replacement

Battery Replacement Door: Under normal conditions, the original battery in your UPS will
last several years. Battery replacement should be performed only by qualified service
personnel. Refer to "Battery Warnings" in the Safety section. Should your UPS require
battery replacement, visit Tripp Lite on the Web at tripplite.com/support/ battery/index.cfm
to locate the specific replacement battery for your UPS.
1
2
3
UPS and Battery Recycling
21-10-010-932442-Book.indb 9 21-10-010-932442-Book.indb 9
1
Carefully pull the front panel away from the UPS.
Place front panel on top of the unit. Remove the battery support
bar.
2
Remove old batteries.
Carefully pull the batteries from the UPS and disconnect them.
3
Connect new batteries.
Connect the new batteries in exactly the same manner as the old
ones: positive (red) connectors together and negative (black)
connectors together. Carefully push batteries back into the UPS.
4
Reassemble UPS.
Reinstall the battery support bar and replace the front panel.
P lease recycle Tripp Lite Products. The batteries used in Tripp Lite
products are sealed Lead-Acid batteries. These batteries are highly
recyclable. Please refer to your local codes for disposal requirements.
You can call Tripp Lite for recycling info at 1-773-869-1234.
You can go the Tripp Lite Website for up-to-date information on recycling
the batteries or any Tripp Lite product. Please follow this link: tripplite.
com/support/recycling-program/
9
10/14/2021 3:57:35 PM 10/14/2021 3:57:35 PM