Tripp Lite SMART1050SLTAA Owner's Manual page 8

Basic Operation
21-10-010-932442-Book.indb 8 21-10-010-932442-Book.indb 8
Telephone/Network Protection Jacks: These jacks protect your
equipment against surges over a telephone/network data line.
Connecting your equipment to these jacks is optional. Your UPS will work
properly without this connection.
Not compatible with PoE (Power Over Ethernet) applications.
Accessory Slot: Remove the small cover panel from this slot to install
optional accessories to remotely monitor and control your UPS. Refer to
your accessory's manual for installation instructions. Visit tripplite.com
for more information, including a list of available SNMP , networking
management and connectivity products.
Fan: The fan runs continuously to cool the UPS system's internal
components. It will operate at a higher speed when the UPS is in battery
backup mode, charge mode, carrying a heavy electrical load or an over-
temperature condition.
Input Breaker: Protect your electrical equipment from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then
reset it by pressing the breaker in.
8
10/14/2021 3:57:29 PM 10/14/2021 3:57:29 PM