Table of Contents
Advertisement
Quick Links
Owner's Manual
Intelligent, Line-Interactive UPS System
• 220/230/240V Pure Sine Wave Input/Output
Important Safety Instructions
Quick Installation
Optional Installation
Basic Operation
Battery Replacement
Storage and Service
Español
Français
Deutsch
PyccŞèé
SmartPro
Not suitable for mobile applications.
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Copyright © 2006 Tripp Lite. All rights reserved. SmartPro
SLT
®
®
is a trademark of Tripp Lite
2
3
4
5
8
8
9
17
25
33
Advertisement
Table of Contents
Related Manuals for Tripp Lite SmartPro SLT SMX1050SLT
Summary of Contents for Tripp Lite SmartPro SLT SMX1050SLT
- Page 1 Español Français Deutsch PyccŞèé Customer Support: (773) 869-1234 • www.tripplite.com Copyright © 2006 Tripp Lite. All rights reserved. SmartPro ® Not suitable for mobile applications. 1111 W. 35th Street Chicago, IL 60609 USA ® is a trademark of Tripp Lite...
-
Page 2: Important Safety Instructions
SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings • Use caution when lifting UPS. -
Page 3: Quick Installation
UPS. Note: Additional interconnection cords (C13 to C14) are available from Tripp Lite. Call 773-869- 1234 (Part # P004-006). Your UPS is designed to support computer equipment only. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds UPS output capacity. -
Page 4: Optional Installation
Use the included USB cable (see cable (see ) to connect the communication port on your computer to the communication port of your UPS. Install on your computer the Tripp Lite PowerAlert Software appropriate to your computer’s operating system. Telephone/Network Protection Jacks Your UPS has jacks that protect against surges over a telephone line or a network dataline. -
Page 5: Basic Operation
UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED remains lit, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com to locate the specific Tripp Lite replacement battery for your UPS. - Page 6 UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED continues to light, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com to locate the specific Tripp Lite replace-...
- Page 7 Communications Ports (USB or RS-232): These ports connect your UPS to any workstation or server. Use with Tripp Lite’s PowerAlert Software and included cables to enable your computer to automatically save open files and shut down equipment during a blackout. Also use PowerAlert Software to mon- itor a wide variety of AC line power and UPS operating conditions.
-
Page 8: Battery Replacement
2. If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone. - Page 9 1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200603172 93-2443_EN...