D-Link DSL-224 User Manual page 62

Section 3 – Web Configuration
NAT Forwarding
Choose ADVANCED > NAT > NAT Forwarding. The page shown in the figure
appears on the right. Under 1483MER or 1483Routed mode, if NAPT (Network
Address Port Translation) is enabled, the Local IP Address is configured as
10.0.0.1 and the Remote IP Address is configured as 202.32.0.2, the PC with the
LAN IP10.0.0.1 will use 202.32.0.2 when it is connected to the Internet via the
router without NAPT control.
The following table describes the parameters and buttons of this page:
Field
Local IP Address
Remote IP Address Input a remote IP address
Enable
FTP ALG Configuration
Choose ADVANCED > NAT > FTP ALG Configuration. The page shown in the
figure appears on the right. Under 1483MER or 1483Routed mode, if NAPT
(Network Address Port Translation) is enabled, the Local IP Address is
configured as 10.0.0.1 and the Remote IP Address is configured as 202.32.0.2,
the PC with the LAN IP10.0.0.1 will use 202.32.0.2 when it is connected to the
Internet via the router without NAPT control.
Description
Input a local IP address.
Enable the current configured rule.
60