D-Link DSL-224 User Manual page 25

Section 3 – Web Configuration
LAN IPv6 Interface
Choose SETUP > Local Network > LAN IPv6 Interface. The page shown in the
right figure appears. This page allows you to configure IPv6 LAN. User can set
LAN RA server work mode and LAN DHCPv6 server work mode.
The following table describes the parameters of this page.
Field
Global Address
Enable
M Flag
O Flag
Prefix Mode
DHCPv6 Mode
Description
Specify the LAN global ipv6 address. It can be
assigned by ISP.
Enable or disable the Router Advertisement
feature.
Enable or disable the
configuration" flag in RA packet.
Enable or disable the "Other configuration" flag in
RA packet.
Specify the RA feature prefix mode:
"Auto": the RA prefix will use WAN dhcp-pd prefix;
"Manual": user will specify the prefix address,
length, preferred time and valid time.
Specify the dhcpv6 server mode:
"None": close dhcpv6 server;
"Manual": dhcpv6 server is opened and user
specifies the dhcpv6 server address pool and other
parameters.
"Auto": dhcpv6 server is opened and it use WAN
dhcp-pd prefix to generate address pool.
"Managed address
23