D-Link DSL-224 User Manual page 38

Section 3 – Web Configuration
Choose SETUP > Wireless Setup> Wireless Security. The page shown as the
figure appears on the right. The page shows how to set WPS.
There are 3 methods to realize wireless connection through WPS.
- PBC
Click the Start PBC button in this page. And then click WPS button on the client to
be connected within 2 minutes. The connection will be established.
- Based on the PIN of 224.
1) Do not select Disable WPS.
2) Click Start PIN button beside Pin Configuration.
3) Input the Device PIN (a random code displayed in this page) in the WPS
application interface of the client to be connected. And then click PIN on the
client.
4) After setting, click Apply Changes.
Note:
If you want to change the PIN, click Regenerate PIN
button in this page.
The wireless SSID must select d-link.
- Based on the PIN of the client to be connected.
1) Do not select Disable WPS.
2) Find the PIN of the client to be connected. Input this PIN in the Client PIN
Number in this page. And then click Start PIN button below.
36