Nanni T4.205 Operator's Manual page 23

Marine engine
Hide thumbs Also See for T4.205:
Table of Contents

Advertisement

Trim indicator
ONLY IN STERN DRIVE VERSION
The trim indicator displays the level
of tilt of the Stern drive.
1
MID
DN
TRIM
NOTICE: Modifying the boat trim
will affect its performance and its
behavior when cruising.
On a twin engine boat, each drive
can be controlled independently. In
such case, there is one Trim indica-
tor for each engine.
20
2
UP
3
Three operating ranges are avail-
able:
1. TRIM RANGE
The trim range is used to adjust the
boat trim at all engine rpm speed,
from idle to max rpm at wide open
throttle.
2. BEACH RANGE
The beach range is used to raise
the drive for running at reduced
speed in shallow water or when
water depth is uncertain.
CAUTION
The max engine speed allowed
when the drive is in the beach
range is 1000 rpm.
3. LIFT RANGE/TOWING
This range is use to completely lift
the drive when towing the boat.
CAUTION
Never start or run the engine
when the drive is in the lift range.

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4.230T4.270

Table of Contents