Inspect The Unit; Transportation Guidelines - FLOWTECH flowboost G.V Operation And Maintenance Manual

Inspect the unit

Remove packing materials from the product.
Dispose of all packing materials in accordance with local regulations.
Inspect the product to determine if any parts have been damaged or are missing.
If applicable, unfasten the product by removing any screws, bolts, or straps. For your personal safety, be careful
when you handle nails and straps.

Transportation guidelines

Stay clear of suspended loads.
Observe accident prevention regulations in force.
Do not damage the cables during transport; do not squeeze, bend or drag the cable.
Always keep the cable ends dry.
Secure the unit against tipping over and slipping until it is mounted and fixed in its final location.
Lift and handle the product carefully, using suitable lifting equipment (stacker, crane, crane mounting device,
lifting blocks, sling ropes, etc.).
Always lift the unit by its lifting handle.
System lifting
Assembled units and their components are heavy. Failure to properly lift and support this equipment can
result in serious physical injury and/or equipment damage. Lift equipment only at the specifically identified lifting
points. Lifting devices such as eyebolts, slings, and spreaders must be rated, selected, and used for the entire
load being lifted.
Select the lifting points depending on model (see Figure 1).
Always lift the unit by its lifting points.
Use suitable lifting equipment and ensure that the product is properly harnessed.
Wear personal protective equipment.
Stay clear of cables and suspended loads.
Lifting diagrams
Figure 1: Lifting
flowboost
G.V Pump Manual
7