Get your fitter to explain your installation to you. Have the required checks and services done. Keep the instruction manuals in good condition close to the appliance. 22/07/2008 - 300017625-001-B WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF...
- Cleaning the pumps - Antifreeze protection - Protection against corrosion on domestic hot water tanks fitted with a titanium anode WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF 22/07/2008 - 300017625-001-B...
: Min position Only domestic hot water is in operation 4.2.2 Setting the domestic hot water temperature 35 to 60 °C Set the DHW thermostat to the desired setting. 22/07/2008 - 300017625-001-B WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF...
- Close the gas valve - The boiler and the chimney must be swept carefully. - Close the door of the boiler to prevent the internal circulation of air. WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF 22/07/2008 - 300017625-001-B...
Flashing rapidly Flashing rapidly pressure are too low Top up the heating circuit with water. Carry out a visual check for the presence of any water leaks. WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF 22/07/2008 - 300017625-001-B...
If it is often necessary to top up the installation with water, contact your fitter. - Check that the heating pump is operating correctly. - Check the boiler thermostat settings. 22/07/2008 - 300017625-001-B WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF...
750 x 454 x 340 750 x 454 x 340 Insulation class IP20 IPX4D IPX4D Conditions of use: - Max. safety temperature: 95 °C - Safety thermostat: 105 °C WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF 22/07/2008 - 300017625-001-B...
Page 13
Sub-assemblies such as motors, pumps, electric valves etc. are guaranteed only if they have never been dismantled. 22/07/2008 - 300017625-001-B WHE 2.24 / WHE 2.24 FF-3S / WHE 2.28 FF...